Brand: JM / Jun Ming
Manufacturer model: JMCJ50-315B
Features: assembly type / single spring / meet DIN24960 and GB65556 standards / corrosion resistant design
Temperature: -40℃ + 180℃  Pressure: 4.0MPa, not suitable for negative pressure and evacuated state Line speed: 25m/s Product presentation:
Salting water pump is the preferred corrosion resistant pump for conveying salt, acid, alkali and other corrosive medium solutions.Salting pump assembly seal is a kind of shaft seal device, which is widely used in desalination pump equipment in thermal power plants. Because the transmission shaft passes through the inside and outside of the equipment, it forms a circular gap between the shaft and the equipment, which causes the medium in the equipment leaking outward through the gap.Therefore, the mechanical seal, is derived from the basis of non-assembly, can significantly reduce the equipment leakage phenomenon, ensure the stable operation of the equipment, reduce waste and pollution, its use effect and operation life have better guarantee than the non-set installed seal.
Applicable scene:
The seal is mainly used for conveying salt, acid, alkali and other corrosive medium solution in thermal power plants.
Common seal type:CL45D-50N,JMCJ50-315B